What is the significance of Solenoid to your Boat?

A solenoid creates a controlled magnetic field when an electrical current is passed through it. Solenoid is a tube-shaped coil of wire acting as a magnet when carrying electric current. It has a core material known as ferromagnetic that produce a uniform magnetic field in a volume of space.

The force in a solenoid valve is the solenoid coil, which converts electrical energy into magnetic energy that is used to modulate the valve. A solenoid valve has an inlet pipe that transports the gas or liquid into the solenoid valve. When the solenoid coil is deactivated, the force of the spring pushes the stopper back into place against the inlet pipe. An even more powerful solenoid uses hydraulics as its basis of power.  When the solenoid has released all of its energy, the hydraulic fluid drains out of the chamber and the piston is drawn back to its original position.  So you see, our boat can never do this well without the solenoid.

But of course, we must not just buy any solenoid.  We need to know what the compatible for our boat is whether it is mercruiser, Yamaha, Delco, Mercury or the like. That’s why in www.magemarinestore.com we offer variety of solenoid. Take a peak on some of it below.

Image

ARCO Solenoid SW984

  • Solenoid for Delco boat engine
  • Metric Solenoid
  • 12 volt
  • VOLVO PENTA Starter:

30124

30460

30140

30470

Image

ARCO Solenoid SW981

  • Solenoid for MERCURY boat engine
  • Mercury 65057A1, 65057, 65057T1
  • Grounded base
  • 12 volt
  • Mercruiser Starter:

30120

30456

50143

30123

50169

Image

ARCO Solenoid SW975

  • Solenoid for CHRYSLER boat engine
  • Grounded base 12 Volt
  • Replaces: Chrysler 177917

Now what are you waiting for. Check your solenoid and see if it is working properly. Or better yet, call us at 855.666.4220 to know what the solenoid fits for your boat. You can also reach us through email at sales@magemarinestore.com.  We will make sure that you will enjoy your ride to your boat by giving you advise and tip. Until on our next blog. Have a safe sailing!

What is the Purpose of Boat Transom?

Transom is the exterior forming the stern of a vessel. Transom can take a variety of shapes, usually vertical or curved. Why it is important? It is because outboard motors are usually mounted on the transom and secured using bolts or clamps. Since transom is the significant area where outboard motor is placed, we must choose the best jack plates that we can mount in our transom. Take a peak to our best seller transom jack plates.

CMC Static Setback Jack Plate – there are four variety of static setback plate you can choose from out site. One of these are below, the other you can view by just clicking this link.

Image

9″ Static Setback 90012

  • 9 inch set back static transom plate has 1 1/2 inches of adjustment at the marine transom and 1 inch of adjustment on the motor bracket.
  • You can use this to give a total set-back of 14.5″ when used with the 65201 which is 5.5″ set-back.
  • Made of 6160 T6 extruded aluminum alloy.
  • Rated for V-6 and smaller boat engine applications.

CMC Manual Jack Plate – for manual jack plate, we have 5 selection of this. Two among the five selection are currently on sale. Check it below or click this link for a full selection of manual jack plate.

Image

Manual Jack Plate 65012

  • 5 1/2 inch of setback from the boat transom.
  • Made for V-6 and smaller marine motor applications.
  • 5 inches of vertical adjustment.
  • Easily adjustable from top or bottom.

CMC Hydraulic Jack Plates – Nine different hydraulic jack plates are available that will surely fits to your taste. Check it by clicking this link.

Image

PL-65 High Speed Hydraulic Jack Plate 5 1/2″ Set back 65302

  • Power-lift totally waterproof!
  • Marine electric hydraulic system is made of 100% non-ferrous material for corrosion resistance in any water.
  • The hydraulic actuator is completely self-contained with its own fluid reservoir (hydraulic tank and hoses inside the boat are not necessary).

Now you have all the options to choose what will you put to your transom. These transom jack plates that we offer are surely the top of the line in the market. For other boat parts that you need, visit our website at www.magemarinestore.com or email us at sales@magemarinestore.com. You can also reach us thru phone at 855.666.4220. We are open from Monday through Friday, from 8am to 5pm central time.

What Solenoid can do to your Boat?

Solenoid is a tube-shaped coil of wire acting as a magnet when carrying electric current. It has a core material known as ferromagnetic that produce a uniform magnetic field in a volume of space. A solenoid creates a controlled magnetic field when an electrical current is passed through it.

The mechanical force in a solenoid valve is the solenoid coil, which converts electrical energy into magnetic energy that is used to modulate the valve. A solenoid valve contains an inlet pipe, which transports the gas or liquid into the solenoid valve. When the solenoid coil is deactivated, the force of the spring pushes the stopper back into place against the inlet pipe. An even more powerful solenoid uses hydraulics as its basis of power.  The piston or pin is seated in a cylinder filled with a hydraulic fluid.  As this hydraulic fluid fills the cylinder, everything is pushed forward, including the piston or pin.  As the piston travels towards a piece of metal or other target, the fluid buildup becomes very resistant to compression, and the piston will concentrate all of the cylinder’s energy on whatever it encounters, even the heaviest titanium. When the solenoid has released all of its energy, the hydraulic fluid drains out of the chamber and the piston is drawn back to its original position.  So you see, our boat can never do this well without the solenoid.

But of course, we must not just buy any solenoid.  We need to know what the compatible for our boat is whether it is mercruiser, Yamaha, Delco, Mercury or the like.

That’s why in www.magemarinestore.com we offer variety of solenoid. Take a peak on some of it below.

Image

ARCO Solenoid SW984

  • Solenoid for Delco boat engine
  • Metric Solenoid
  • 12 volt
  • VOLVO PENTA Starter:

30124

30460

30140

30470

Image

ARCO Solenoid SW981

  • Solenoid for MERCURY boat engine
  • Mercury 65057A1, 65057, 65057T1
  • Grounded base
  • 12 volt
  • Mercruiser Starter:

30120

30456

50143

30123

50169

Image

ARCO Solenoid SW975

  • Solenoid for CHRYSLER boat engine
  • Grounded base 12 Volt
  • Replaces: Chrysler 177917

Now what are you waiting for. Check your solenoid and see if it is working properly. Or better yet, call us at 855.666.4220 to know what the solenoid fits for your boat. You can also reach us through email at sales@magemarinestore.com.  We will make sure that you will enjoy your ride to your boat by giving you advise and tip. Until on our next blog. Have a safe sailing!