What is the Purpose of Boat Transom?

Transom is the exterior forming the stern of a vessel. Transom can take a variety of shapes, usually vertical or curved. Why it is important? It is because outboard motors are usually mounted on the transom and secured using bolts or clamps. Since transom is the significant area where outboard motor is placed, we must choose the best jack plates that we can mount in our transom. Take a peak to our best seller transom jack plates.

CMC Static Setback Jack Plate – there are four variety of static setback plate you can choose from out site. One of these are below, the other you can view by just clicking this link.

Image

9″ Static Setback 90012

  • 9 inch set back static transom plate has 1 1/2 inches of adjustment at the marine transom and 1 inch of adjustment on the motor bracket.
  • You can use this to give a total set-back of 14.5″ when used with the 65201 which is 5.5″ set-back.
  • Made of 6160 T6 extruded aluminum alloy.
  • Rated for V-6 and smaller boat engine applications.

CMC Manual Jack Plate – for manual jack plate, we have 5 selection of this. Two among the five selection are currently on sale. Check it below or click this link for a full selection of manual jack plate.

Image

Manual Jack Plate 65012

  • 5 1/2 inch of setback from the boat transom.
  • Made for V-6 and smaller marine motor applications.
  • 5 inches of vertical adjustment.
  • Easily adjustable from top or bottom.

CMC Hydraulic Jack Plates – Nine different hydraulic jack plates are available that will surely fits to your taste. Check it by clicking this link.

Image

PL-65 High Speed Hydraulic Jack Plate 5 1/2″ Set back 65302

  • Power-lift totally waterproof!
  • Marine electric hydraulic system is made of 100% non-ferrous material for corrosion resistance in any water.
  • The hydraulic actuator is completely self-contained with its own fluid reservoir (hydraulic tank and hoses inside the boat are not necessary).

Now you have all the options to choose what will you put to your transom. These transom jack plates that we offer are surely the top of the line in the market. For other boat parts that you need, visit our website at www.magemarinestore.com or email us at sales@magemarinestore.com. You can also reach us thru phone at 855.666.4220. We are open from Monday through Friday, from 8am to 5pm central time.

Outboard Motor Jack Plates from CMC

Well guys. You knew from our previous post how outboard can simply do amazing job to you boat. So, the next question is what are the other options for an outboard motor for my boat? Solution? The CMC Manual Jack Plates and CMC Hydraulic Jack Plates! You read and saw it right and the next thing that you need to know is which will I choose, Manual Jack Plates or Hydraulic Jack Plates? But of course, both of these perform very well the only difference is that Hydraulic Jack Plate gives you more convenience than Manual Jack Plate but Manual Jack Plate is cheaper than of Hydraulic Jack Plate. Now, are you confused on what to choose? To give you more of an idea, let me present you some sample product of Manual Jack Plates and Hydraulic Jack Plates found at www.magemarinestore

Manual Jack Plates

Image

ML-65 10″ Setback Manual Jack Plate Features:

·         One Piece Design
·         Provides 10 inch set back from the transom
·         Gives 5″ of vertical travel.
·         Rated up to 300 HP V-6 outboard motor applications.
·         Made of 1/2″ 6061 T6 extruded aluminum alloy.
·         Increases fuel efficiency.
·         Regular price: $330.20
·         Sale price: $304.80

Image

Manual Jack Plate 65012 Features:

·         5 1/2 inch of setback from the boat transom.
·         Made for V-6 and smaller marine motor applications.
·         One piece design for outboard motor.
·         This high strength 6061 extruded aluminum alloy mounting bracket lets you easily raise or lower your boat motor.
·         Regular price: $317.20
·         Sale price: $292.80

Hydraulic Jack Plates

Image

PL-65 Hydraulic Jack Plate Features:

·         Provides 5 inches of vertical travel
·         5 ½ inches of set back from the boat transom.
·         Ideal for fresh or salt water use. No welds or castings to break.
·         Adjustable for different speeds, water conditions, and varying loads on your boat.
·         Price: $822.25

Image

PL-65 Hydraulic jack plate with Gauge Features:

·         Provides 5 inches of vertical travel
·         5 ½ inches of set back from the transom.
·         Adjustable for different speeds, water conditions, and varying loads on your boat.
·         Rated for V-6 and smaller motor applications.
·         Price: $992.45

Did you notice that limited Manual Jack Plates are sale? Compare our prices from our leading competitor and you will see how much you can save with us. So what are you waiting for? Grab your phone and place your order now. Call us at 855.666.4220 we are open from Monday through Friday from 8am to 5pm central time. You can also send us your inquiry at sales@magemarinestore.com . We will wait your call and email.  Hurry now while supplies last!